Operating Manual
Replacement Filters
The LabTower EDI pure water system is a reaction to the continually increasing requirements
that water of ultrapure quality must fulfil, the increasingly strict demands resulting from technological advances and the need for user-friendly systems and complete solutions.
LabTower EDI systems have been solely and specifically designed to excel in the intended use, which is to produce sterile filtered pure water free of particles, salts and organic compounds. To benefit from the long possible service lives of the high-quality purification media, feed the pure water system with water which has been subjected to an upstream pre-treatment step reverse osmosis, ion exchange or distillation ,
- Analytical techniques in laboratories:
- HPLC High Performance Liquid Chromatography
- IC Ion Chromatography
- ICP Inductive Coupled Argon Plasma
- AAS Atomic Absorption Spectrophotometry
- TOC Analysis Total Organic Carbon
- DNA Research
- etc.
- Reagent and solution preparation:
- Cell culture media
- Tissue culture media
- Make-up water for reagents for on-line analytical systems
- Water for high-purity rinse processes on a laboratory scale
Resistivity Type 1: 18.2MΩ·cm at 25°C; Type 2: 10 to 15MΩ·cm at 25°C
Conductivity - Type 1 : 0.055µS/cm; Type 2: 0.067 to 0.1µS/cm
Feedwater Source tap Flow Rate : 1.5L/min.
Total Organic Carbon : 1 to 5ppb
Bacterial Content : <0.01 CFU/mL
Particles >0.2µM/mL : <1
TOC Monitor with UV Intensity Monitoring : No
Feed Water Monitoring : Yes
Feedwater Connector : 3/4 in. NPT
Feedwater Pressure : 1-6 Bar
Height Metric : 1500mm Width Metric 450mm
Net Weight Metric : 58kg
Operating Pressure : 2 to 6 bar
Voltage : 90 to 240V Hertz 50/60Hz
Bacterial retention : 99% Depth Metric 580mm
Permeate performance : 30L/hr. at 15°C
Power Consumption : 0.25kW
Electrical Requirements : 90 to 240V 50/60Hz -
Related Categories